Orbital flying cut-off on tube mills
TubeMaster saw blades have especially been designed for orbital flying cut-off applications on tube mills.
Key features of this saw blade are fractureresistant carbide tips, protected with a high-tech TiAlN-based PVD coating.
Combined with a light cutting geometry for smooth chip evacuation, a milled like surface finish is achieved. This geometry also reduces vibration when cutting thin walled tubes (<4mm), thereby achieving excellent blade life.
The new generation of TubeMaster products has a new body design, new carbide grade, new tip geometry and a special coating. This results in a higher blade life and more regular blade performance.
High line speed
High blade life
Cuts high tensile API Pipes (up to 1.000 N/mm2, X80, HT)
Orbital, flying cut-off applications
TubeMaster saw blades are available for all types of orbital cutting machines, such as MTM, OTO mills, Elmaksan, Kusakabe, Linsinger, Nakata and SMS Meer.
Suggested cutting speed: 350 – 400 m/min. Feed 1/2: 0,04 / 0,12 mm/tooth.
Note: To accommodate higher requirements of line speed or reduce vibration level, much higher cutting speeds (up to 600 m/min) can be applied. Tooth load can be raised , while respecting max fill ratio of 10% during entry. Respect max cut depth of 3mm.